Search found 38 matches

Well, this is certainly not something that happens to everyone running this version of NAWS. I'm not sure what is wrong.

The upload support, the Upload page, and the Admin system are all separate and separatly controlled.

In the program's "Security options" there is a checkbox titled "Allow clients to ...

There is probably something else listening on that port number.

Try using a program such as TCPView from
http://www.sysinternals.com/Utilities/TcpView.html
to see what is listening on that port.

Dear raan,

Thank you for your suggestion. It has been incremented in the internal feature suggestions list.

- NetworkActiv Software

It's good to hear that things are working acceptably now.

Is there any way I could try 4.0.. as a beta tester I would "hammer" NAWS w/gigabit adaptors at 70-90 megs/sec w/2-3 gig downloads. P.S. 3.5 does it very well except for this little startup/ ...

It would be interesting to see what people use this here "NAWS" for...

If you chose "Other", please post a reply with basic details.

Thanks for posting!

BTW: If you want t ...

Dear terraserve,

If adding a delay to the automatic starting of the server brings about success in its listening, then version 4.0 may bring about ease of its starting. In the preferences of versio ...

It would be interesting to learn what the common uses of AUTAPF are.

If you chose "Other" for the poll, please post a message with details.

Thanks for polling!

The users and groups functionality is already implemented... To manage the users and groups, use the "Users and Groups Management" in the Security Options. To configure which users/groups ma ...

Nicely done, now that i can do. I'll just have it point to my web page's address so that will always take someone back to the root of my webpage.

I'm not sure if you are aware, but the link text t ...

There is a solution, though a bit weird and with a possibility of causing problems with certain setups...

Since you can put HTML in the "Server name" field at the lower-right of the main ...

It happens occasionally that due to the way the program was used, it did not save the settings and so when you re-start it, it does not remember the settings, such as the setting for that feature whic ...

That sounds correct.

There are two basic options available here.

1. Change settings under Preferences->Visual Preferences for File Listings.

2. Create your own HTML and/or use a third party file listing script. S ...

What you would need to do is to create a new port forwarding operation (via the 'New' button) for each of the ports listened on by the game server. This would need to be done from a computer at home o ...

First I will talk about the starting with Windows part, and then the "Automatically start previously running port forwarding operations" part.

First, the starting with Windows is based on ...

Hello,

From what I read in your message, you have successfully created a username that is in two different groups. From what I recall, that's not supposed to be possible, unless they have different ...

For technical details, see the [url=http://www.ietf.org/rfc/rfc2069.txt]HTTP Digest Authentication RFC.

Basically it goes like the following when password authentication is enabled:

-> The cl ...

Some routers don't handle loopback connections... That is, they will not let you connect to a server on your local network by your Internet IP address even though you have correctly forwarded the port ...

Jromariz,

I was wondering if you could enable the automatic logging system and let me know if you find anything peculiar in the log when that problem begins to happen.

Also, could you run a prog ...

I'll have to look into that some time.

Can the services be set to run in the background?

I'm not sure what you mean by that. If you configure PIAFCTM correctly, it should start up and minimize to the system tray, even before you log in. ...

There are two steps to making NetworkActiv PIAFCTM automatically choose a mode of protocol analysis and start listening shortly after it begins...

(be sure to not have any other instances of the pr ...

Hey, I was just wondering if anyone has experienced any differences with that build of AUTAPF, or if anyone who might have tried it has had it resolve the problem (or cause any new ones). If anyone ha ...

If you are new to the concept of what domains are, it might be a good idea to check out the "IP Addresses, Hostnames, and Domains" section on the [url=http://www.networkactiv.com/WebSiteAndW ...

Vigilante,

By the statistical package I am guessing you mean the statistical information (available under /hits/ by default) that the server collects and displays. This will certainly not be remove ...

Greetings,

We just wanted to let everyone know that [url=http://www.networkactiv.com]www.NetworkActiv.com is powered by NAWS.

This is our proof to you that NAWS can be used to host real-world We ...

Hello,

Just earlier today I witnessed a file of about 450 MB in size tranfer from NetworkActiv Web Server 4.0 Pre-Alpha-3 and there were no problems at all with this file's transference. Additional ...

Hello,

About a year ago there was a user reporting a very similar problem in which AUTAPF would stop listening under heavy load with several active connections. I made a test build then to try to r ...

If you feel competent in working with ports, the netstat command (or with a packet capturing tool), and advanced settings to do with your FTP software (if such settings exist), it would probably be po ...

You can now find 'Powered by NAWS' images at
http://www.networkactiv.com/Powered_By_NAWS.html

Due to a logging glitch in versions prior to 4.0, the program must be restarted after checking the "Automatically log the list items to a text file" checkbox on the "Configuration for a ...

File Transfer Protocol (FTP) uses one base connection for authentication and control, and one additional connection for each transfer that takes place. A transfer can be of a file, a directory (folder ...

NetworkActiv Port Scanner (also called NetworkActiv Scanner) version 4.0 is freeware and may be used at no charge for personal and/or commercial uses.

NetworkActiv Web Server version 4.0 is under development and NetworkActiv would like to know what features users would most like to see in this (or a further) new version.

Please select an option i ...

For the sake of your privacy and the security of your account information, this forum is now SSL secured.

All the information you read on this forum, all the information you post to this forum, and ...

A long needed feature of NetworkActiv Software... a forum for publically viewable support and for the discussion of other topics, has finally been created and made available.

Feel free to participa ...

	FAQ Search Memberlist Usergroups Register
	Profile Log in to check your private messages Log in